Digital Coating Thickness Gauge Coat Gauge FN+
Features:
Technical Specifications :
Model | Metrix+ Coat Gauge FN+ |
Measuring principle | Magnetic induction(F) Eddy Currents(nF) |
Measuring range | 0 to 1300um (0 to 51.2mils) |
Accuracy | (3%+2um) (3%+0.078mils) |
Resolution | 0um~999um(1um) 1000um~1300um(0.01mm) |
Calibration | One point to four point calibration, zero point calibration, Basic |
Data group | One direct group(readings not be stored to memory) Four general group(readings will be stored automatically) NOTE: each group have individual statistics, alarm limit settings and calibration |
Statistics | No. of readings, mean, minimum, maximum and standard deviation |
Units | um , mm, mils |
Alarm | User can set the high/low alarm limit Alarm icon displayed on LCD when over the limit |
Minimum curvature radius convex | 1.5mm |
Minimum curvature radius concave | 25mm |
Minimum measuring area | Diameter 6mm |
Minimum thickness of substrate | 0.5mm(0.02)(F) 0.3mm(0.012)(nF) |
Maximum measuring rate | Two readings per second |
Computer interface | Download data via USB |
Power supply | Two 1.5V AAA battery |
Operation environment | Temperature: 0 to 40 (32 to 104) humidity: 20% to90%rh |
Storage environment | Temperature:-20 to 70 (-4 to 158) |
Standard Compliance | ROHS WEEE |
Size | 110mm53mm24mm(4.33"2.09"0.94") |
Case Material | ABS 92g(3.24 oz) |
Standard Accessories | Coating Thickness Gauge, 0 calibration block, Standard foil, USB cable, Two 1.5V AAA battery, Technical manual. |
MINOO IMPEX
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Private Limited. |