Digital Hardness Tester

Features:

• Converts to all common scales of HV, HB, HRC, HRB, HRA, HS. 
• Pen type ergonomic and skid proof design
• 128×32 OLED display with user friendly menu interface
• Inbuilt function of Software Calibration. 
• Memory storage of 600 groups of data. 

Applications:

This can be used to measure the hardness of die cavity of moulds, inspection of bearings, installed machinery, heavy work pieces and other mass produced parts in a production line, failure analysis of pressure vessel, steam generator and other equipment, material identification in the warehouse of metallic materials, rapid testing in large range and multi-measuring areas for large-scale work piece.  

 

Measuring Principle:

This instrument employs the rebound method of measuring hardness by using an assembly of an impact body and magnets to measure the impact and rebound velocities from the material under test to determine the Leeb Hardness, which can be converted to general hardness scales of HV, HB, HS, HRC, HRB, etc., for analysis.  

For more details visit: https://metrixinstrument.in/product/lht-1

Features:

• Converts to all common scales of HV, HB, HRC, HRB, HRA, HS. 
  
• Pen type ergonomic and skid proof design
  
• 128×32 OLED display with user friendly menu interface
  
• Inbuilt function of Software Calibration. 
  
• Memory storage of 600 groups of data. 
  

Applications:

This can be used to measure the hardness of die cavity of moulds, inspection of bearings, installed machinery, heavy work pieces and other mass produced parts in a production line, failure analysis of pressure vessel, steam generator and other equipment, material identification in the warehouse of metallic materials, rapid testing in large range and multi-measuring areas for large-scale work piece.  

Measuring Principle:

This instrument employs the rebound method of measuring hardness by using an assembly of an impact body and magnets to measure the impact and rebound velocities from the material under test to determine the Leeb Hardness, which can be converted to general hardness scales of HV, HB, HS, HRC, HRB, etc., for analysis.  

Digital Hardness Tester Hardmaster-P

Features:

• LCD display of 12864 matrix with back-light showing all functions and parameters.
• Converts to all common hardness scales (HV, HB,HRC, HRB, HRA, HS).
• Powerful PC Software available and USB 1.0 interface and USB with Protective Membrane.
• 7 types of Impact Device optional, which don't need to be recalibrated while charging.
• Memory of 600 groups data(impact times:32 1.
• Material of cast steel is added; HB values can be read out directly when D/DC impact device is used to measure cast steel work piece.
• Normal battery AAA and power store while USB connected and charging Controlling circuit.
• Inbuilt function of Software Calibration.

Digital Rubber Hardness Tester(Durometer) RHT-D

Description:

Digital Rubber Hardness Tester(Durometer) RHT-A

Description:

Leeb Hardness Tester MI 970

• 0.8% at LD=970
• 170 970HLD
• External Probe Memory 50 Measurement
• HL-HRC-HRB-
• HRA-HB-HV-HS

• Die cavity of molds
• Inspection of bearing and other mass produced parts on a production line
• Failure analysis of pressure vessel, steam generator and other equipment
• Inspection of installed machinery, permanent parts of assembled systems and heavy work pieces.
• Testing surface of a small hollow space
• Material identification in the warehouse of metallic materials
• Rapid testing in large range and multi-measuring areas for large-scale work piece

• Small in size for narrow space.
• Test at any angle, even upside down.
• Direct display of hardness scales HRB, HRC, HV, HB, HSD, HL.
• Memory could store 50 groups including single measured value, impact direction, material and hardness scale etc.
• User recalibration function allowed.
• Can communicate with PC computer for statistics and printing by the optional cable.
• Manual or automatic shut down.
• Low battery indication.

Leeb Hardness Tester 130

130 is the most versatile all-in-one solution for portable hardness testing. The Leeb hardness principle is based on the dynamic (rebound) method and is best suited for on-site testing of heavy work piece, the installed machinery and permanently assembled parts, die cavity of molds, bearings and other parts, failure analysis of pressure vessel, steam generator and other equipment, testing surface of a small hollow space, material identification in the warehouse of metallic materials, rapid testing in large range and multi-measuring areas for large-scale work piece, etc.

• 130 +10HLD
• 170 960HLD
• External Probe
• Memory 500 Measurement
• HL-HRC-HRB-
• HRA-HB-HV-HS

Leeb Hardness Tester Hardmaster

Features